Loading...

New Product Introduction

We engage our potential customers at the early stage of their products introduction, injecting our knowledge base into their products, so as to ensure cost effectiveness and quality of their final products. We work with customer to do detailed root cause analysis and corrective action plans at each stage of proto runs, pilot run and the final Qualification Run, prior to Mass Production.

We are a strong believer in Doing it Right from the Get Go.

We have a technically strong and dedicated NPI team, coupled with great communication and management skills to ensure all our customers’ products are introduced in Time and Quality.

We look forward to growing the business with our Customers.

Supply chain management

Strategic Location

  • Within an hour drive from Penang International Airport & the main forwarders hub.
  • In proximity with various supporting suppliers and component distributors.

 

Dynamic Team

  • Sourcing – Specialised and Experienced team to drive the most cost effective solutions for our customers.
  • Purchasing – Maintaining optimum inventory level to support customers’ demands and on time delivery.
  • Logistics – Our team integrates and consolidates our supply chain with agility and flexibility to meet all our customers demand.

Surface Mount Technology


<span>Equipped with State of the Art Surface Mounting Technology, incorporated with component level traceability. We provide our customers with the flexibility and agility without compromising on quality and productivity

Our Surface Mount manufacturing capabilities includes:

Surface Mount Technologies (SMT)

  • 01005" Component Size
  • 0.4mm QFP Lead Pitch, 0.25mm BGA Ball Pitch
  • SPI System
  • AOI System
  • X Ray System
  • BGA rework
  • N2 Reflow
  • Flying Probe

 

Auto Insertion

  • Axial and Radial Components

 

Plated through Hole and Wave Soldering

Test Systems Development


Our team supports hardware and software in house Test Systems Development. We are capable in many software platforms which enable flexibility of solutions to meet customer requirements.

We are accomplished in:

  • Radio Frequency up to 3Ghz
    • GSM
    • GPRS
    • Mobile & Portable Radio ( Analog and Digital)
    • Bluetooth & Zigbee
  • Full Range Audio Test
    • Speakers (Single or Multi Channel)
    • Microphone ( Single or Multi Channel
  • Power Electronics
    • Analog and Digital DC- DC Converters
    • AC- DC Converters
    • Battery Chargers
  • Digital Camera

 

QUALITY MANAGEMENT

Quality is our Passion

BCM is passionate to strive for highest quality levels for our customers through our executions in quality planning, initiatives in driving continuous improvement and working with our customers in achieving the ultimate goals.

Our experienced team executes our established operating procedures, ensuring our quality policy is effectively communicated to all levels. We emphasize customized quality plan for our customers, with validated in-house developed systems, subject matter expert in our fields and proven continuous work applications, in ensuring we are compliant with all applicable industry requirements. We undergo regular global TUV quality management system audits and proactively studies and research in implementing the best practices available, in order to stay ahead in the industry.

Through deploying advance quality plan and measureable metrics, we develop the zero defect culture through proactively involving all levels of employees to mitigate risk and promoting seamless processes through execution of lean practices. Our designed trainings for our valued employees continuously steering the momentum to motivate and strive for better manufacturing processes that yields better product quality.

That, makes us an EMS with a difference.

Our Quality Certifications:

  • ISO 9001:2008
  • ISO14001:2004
  • BS OHSAS 18001:2007
  • EN ISO13485: 2012 + AC 2012
  • ISO/TS16949: 2009

Manufacturing

BCM offers our services as a One Stop Turnkey Solution, from Development, Sourcing, Procurement, NPI to Manufacturing and shipments to customers.

Our Specialty includes

  • High Mix Low Volume
  • Box Build
  • Turnkey and Consign Business Model
  • Flexible Schedule
  • Proto and NPI support
  • Further Processing
  • Lean Manufacturing

 

In our pursuit towards Excellence and Customer Satisfaction, we continuously upgrade our technology, capability, Business Integrity and Ethics.

We are a matured organization with experienced employees, incorporating Environmental Protection and Corporate Social Responsibilities in our drive to success.

Engineering

Our diverse background allows us to provide our customers with innovative, smart, cost effective and timely solutions.

Our experienced team is equipped with the right tools, knowledge, Six sigma and Lean manufacturing to address all engineering challenges.

Strength

  • Team adapts to product changes through flexibility
  • Product Development and product assembly technology
  • Supports Box Build and Sub-level Products Assembly
    • Wave Soldering
    • Gold and Specialized Soldering
    • Water Proof Test: IP67
    • Conformal Coating
    • Ultrasonic Welding
    • Yield Improvement
  • Stability and efficiency of processes to deliver on time and at high quality

Communication

Mission Critical 
Public Safety 
Remote Safety

Lightings

LED Street Lighting 
LED Domestic Lightings

Oil & Gas

Down Hole 
Wireline

Automotive

Global or Regional Mobile and Remote Monitoring

power electronics

DC – DC Converters 
AC- DC Converters 
Lighting Control

NEWS AND UPDATES

workimg

October 14, 2016

2015 – CORE MIN POINT AND ZERO STOCK OUT COMPLIA...

Read More

workimg

October 14, 2016

2016 – PERFORMANCE & COMMITMENT BCM is proud ...

Read More

workimg

October 14, 2016

2014 - EXCEPTIONAL PERFORMANCE IN MANUFACTURING ...

Read More

workimg

October 21, 2016

20 Oct 2016 - A beautiful day with so many beautif...

Read More

Welcome!


BCM Electronics Corporation is a medium size world class Electronics Manufacturing Service provider with more than 20 years of experience in the industry and specializing in high mixed-low volume product.

We provide SMT & box build services to MNC's worldwide, some of whom have been with the company since its inception in 1993.

The products we manufacture includes RF Communications, Power Electronics, Oil & Gas, Automotive and Lightings.

Our capability includes IPC up to Class 3, ROHS compliance and we take pride in our focus on environmental protection as part of our business.

Located in Kulim Hi Tech Park Kulim Kedah Malaysia, our manufacturing site is 436,000 Sq ft large with a build up area of 203,000 Sq ft. with over 1200 employee.

read more

Our Team

Gathering of dedicated people in achieving full quality products, our team is the most distinguished people in their expertise with absolute commitment and continuous improvement to provide customer satisfaction.

team

CY Lee

Chief Executive Officer
team

Jensen Seah

SCM Director
team

KS Chong

Top Director
team

Wesley Chieng

QA Director
team

BE Khoo

Director Of Business Development
team

V. Kumar

Director of Finance
team

Michael Lee

SMT and Facilities Director
team

Ismail Omar

Human Resource Senior Department Manager
team

Hafiz Hashim

Test Systems Engineering Senior Department Manager.
team

Mohd Fauzi

Production Manager
team

Ken Choong

Production Manager

Corporate Structure

Like our works?

We are always open to Interesting Project...

Subscribe to Our Newsletter

CAREER WITH US

 

 

1. MES Engineer

Responsibilities:

  • Develop new application systems or enhance current application systems.
  • Debug and troubleshoot in house applications to improve existing functionalities or when is reported by  end user.
  • Provide technical support and enhancement of Manufacturing Execution Systems (MES)
  • Assist in the preparation and implementation of long term MES support strategy.
  • Develop and validate software test plans.
  • Prepare and maintain application documentation (system and user manual) for the in house develop system.
  • Deal with user to gather requirements, creating technical specification and design and development of complex MES projects.

Requirements:

  • Degree in Computer Science or equivalent with at least 3 – 5 years of experience in development and testing.
  • Development experience in HTML, Microsoft SQL, PL/SQL, C#.NET, Web Application performance tuning.
  • Microsoft SQL DBA experience will be an added advantage
  • Experience in developing reasonably large and complex.Net application using C# and SQL databases.
  • Integration with various test machines.
  • Oracle Forms and Reports
  • Experience working in a manufacturing environment and systems- preferably with MEP/ERP or shop floor systems.
  • Knowledge in IT  infrastructure
  • Experience in stored procedure creation and database optimization.
  • Able to work independently and good team player.
  • Able to work under pressure to meet project timeline.
  • Willing to work in Kulim Hi Tech Park

 

 2. MES Manager/ Section Manager

Job Description

  • To lead  the implementation of the shop floor system
  • Work directly with users at all levels to implement projects and develop innovative solutions in accordance with customers standard
  • Report on project progress weekly to management.
  • Feasibility study and user requirement gathering.
  • Application setup and prepare documentation for new system.

 Qualification and Skills

  • Bachelor's degree in Computer Science/ Software Engineering.
  • Experience in software development & implementation and system & database design.
  • Experience working in a manufacturing environment with exposure to develop and/or maintaining manufacturing application and system preferably with MRP/ERP or shop floor system.
  • Able to work under pressure to meet schedules
  • Strong experience in shop floor system in electronics manufacturing environment.
  • Knowledge in C# programming is an added value..

 

3. Senior Electronic Engineer -R&D – 2 vacancies

 Key Responsibilities

  • Perform a full lifecycle product development (Design, Develop, Prototyping, Manufacturing and test).
  • Design systems and components that meet, needs and requirements of the design brief.
  • Schematic design, capture and layout design for high reliability and critical systems.
  • Conduct experiments methodically, analyze data and interpret results.
  • Test and evaluate theoretical designs.
  • Debugging prototype designs (hardware and embedded).
  • Create and document product specification for test and QA.
  • Evaluate product overall performance, reliability and safety to meet regulatory Specifications.
  • Alter and modify design to meet updated requirements, improve yields and cost reduction.
  • Estimate budget and scope of projects.
  • Prepare product reports and documentation.
  • Meeting tight deadlines.
  • Providing technical interface to vendor and suppliers.

Skill/Education 

  • Candidate must possess at least a Bachelor's Degree /Post Graduate Diploma in
    Engineering (Electrical/Electronic) or equivalent.
  • At least 10 years in similar role in the related field is required for this position.
  • Proficiency with engineering design and manufacturing tools
  • Experience in system modeling, data collection and analysis techniques, using software tools such as IDL, MATLAB, SPICE, LabView.
  • Proven knowledge in DFMA methodologies and tools.
  • Hands-on experience with computer-aided engineering (CAM) and computer-aided manufacturing (CAM).
  • Solid understanding of analog and digital signal conditioning, microprocessor interface, communication and control circuits.
  • Proven ability with micro-controller, FGPA, SMPS designs.
  • Understand, interpret and implement regulatory specifications (IEC, UL).
  • Ability to interface with software developers and consultants.
  • Proven knowledge in mass production design and manufacturing processes (SMT, Wave flow, manual assembly)
  • Familiarity with LED luminaries designs would be an advantage.

 

4. Senior Finance Officer – 1 vacancy

  • Fully responsible for GST, Taxation & Fixed Asset management.
  • Analyze financial information detailing asset, liabilities and capital, preparation of balance sheet, profit and lost statement and other reports.
  • Responsible to prepare and comply to all company standards reporting and able to liaise with auditors, tax agent and bankers to meet the compliances.

Qualification:

  • Possess a Degree in Accounting/Finance or other equivalent professional qualification.
  • At least 5 years relevant working experience in general ledger /AP/AR accounting & Taxation experience are required.
  • Strong Excel and database experience preferred.
  • Fast learner and able to work efficiently to meet tight deadlines
  • Independent, highly motivated and ability to work under pressure.
  • Good interpersonal communication skills.
  • Knowledge in Oracle application would be an added advantage.

 

5. Buyer Analyst – 1 vacancy

  • Issue purchase order to suppliers and monitor their delivery performance.
  • Rescheduling of order deliveries from suppliers.
  • Inventory management and control.
  • Suppliers contact and communication

Qualification

  • Possess at least a Diploma in any field
  • At least 2 years working experience in purchasing field in an electronics-manufacturing environment
  • Knowledge of mechanical and electronic parts
  • Knowledge of costing structure and possess good negotiation skills

 

6. Sourcing Executive – 2 vacancies

  • Handle parts sourcing and alternative parts sourcing for existing and new customers
  • Undertake price down/cost savings activities
  • Negotiate for best price, quality, timely delivery and support from suppliers/vendors
  • Issue purchase order to suppliers and monitor their delivery performance.
  • Inventory management and control.
  • Suppliers contact and communication

Qualification/Skills

  • Possess at least a Diploma in any field
  • At least 2 years working experience in sourcing or purchasing field in an electronics-manufacturing environment
  • Knowledge of mechanical and electrical parts
  • Knowledge of costing structure and possess good negotiation skills

 

7. Process & Product Engineer – 3 vacancies

  • Good knowledge in product trouble shooting and failure analysis
  • Capable to perform product failure analysis and testing
  • In charge of debug and debug wip control.
  • Good knowledge in soldering and assembly process.
  • Able to handle new products- FA, pilot build with minimum supervision
  • Good in statistical process control.
  • Candidate will be in charge of new product transfer.

Qualification and Skills

  • Minimum 2 years experience in an electronics manufacturing environment.
  • Possess a Degree in Mechanical or Electronics /Electrical Engineering
  • Good technical knowledge in circuit theory, Mechanical & Electrical and Electronics technology

 

 8.Test Engineer – 1 vacancy

  • Total responsibilities in the Test Engineering Department operation in terms of managing, organizing and planning for optimum efficiency and service to end of line customers.
  • To lead and support line technicians and production group to meet goals and set standards established for quality and delivery indices in terms of test related issues
  • To work with repairer to analyze units and determine root cause and provide recommendation to resolve issues.
  • To train repairers on the correct technique and procedures of executing the process.
  • To liaise with vendors for the fabrication of fixtures, evaluate and buy off fixtures for functionality.
  • To perform analysis and liaise with customers for improvement purposes.
  • To aggressively track product test capabilities performance and reliabilities to achieve minimal downtime through constant audit and monitor line performance against goals set for line measurement.
  • To carry out line improvement projects for reductions of cycle time and work with maintenance team to continuously reduce downtime of fixtures and equipments.

Qualification and Skills

  • Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.
  • At least 2 year(s) of working experience in the related field is required for this position.
  • Preferably Junior Engineers specializing in Engineering - Electronics/Communication or equivalent.

 

9. Senior Mechanical Engineer – R&D - Vacancy

Key Responsibilities

  • Perform a full lifecycle product development (design, develop, test prototypes, manufacture).
  • Design systems and components that meet, needs and requirements of the design brief.
  • Produce outline/wireframe designs from concepts
  • Conduct experiments methodically, analyze data and interpret results.
  • Test and evaluate theoretical designs.
  • Identify, formulate and produce effective solutions to problems.
  • Create and document product specification for test and QA.
  • Evaluate product overall performance, reliability and safety to meet regulatory Specifications.
  • Alter and modify design to meet updated requirements, improve yields and cost reduction.
  • Estimate budget and scope of projects.
  • Prepare product reports and documentation.
  • Meeting tight deadlines.
  • Providing technical interface to vendor and suppliers.

Skill/Education

  • Candidate must possess at least a Bachelor's Degree /Post Graduate Diploma in
    Mechanical Engineering
  • At least 7 years in similar role in the related field is required for this position.
  • Working experience with product lifecycle management (PLM).
  • Familiar with Engineering Plastics processes, tooling and fabrications.
  • Familiar with 2D and 3D engineering designs and manufaturing tools (e.g AutoCad, ProE, Solid works or other cad tools)
  • Adequate knowledge of engineering and statistical analysis tools (ANASYS, FEA, ProE suite or similar tools.
  • Proven knowledge in DFMA methodologies and tools.
  • Mathematical computing and analysis tools knowledge( Matlab, Excel, LabView etc)
  • Hands-on experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM).
  • Solid understanding of core concepts including mechanics, kinematics, termodynamics, material science etc.
  • Understand, interpret and implement regulatory specifications (IEC, UL).
  • Co-ordinate with regulatory qualification agencies.

 

 

  10. Software & Firmware Design Engineer – 2 vacancies

 Key Responsibilities

  • Software architecture and firmware design for high reliability embedded products.
  • Designing, developing, coding, testing, debugging and validation of embedded system software.
  • Concurrent and collaborative engineering support.
  • Rapid software wire framing for Test, evaluating theoretical and prototype designs.
  • Create and document product specification for test and QA.
  • Evaluate product performance, reliability and safety to meet regulatory specifications.
  • Alter and modify firmware design to meet updated requirements, improve yields and cost reduction.
  • Estimate budget and scope of projects.
  • Prepare product reports and documentation.
  • Meeting aggressive deadlines.
  • Providing technical interface to project team, vendors and suppliers.

Experience/Skill/Education

  • Minimum 5-10 years in similar role.
  • Advanced Diploma/ Bachelors/Masters degree in Electronic, Software or Telecommunication Engineering.
  • Familiarity with software configuration management tools, defect tracking tools, and peer review.
  • Familiar with embedded software design development methodologies on resource constrained embedded platforms.
  • Proven experience in embedded systems design with preemptive, multitasking RTOS systems.
  • Experience programming in C, C++, Visual studio.
  • Familiarity with ARM based architecture and related development tools.
  • Working knowledge on different embedded software frameworks.
  • Solid understanding of analog and digital signal conditioning, microprocessor interface, communication and control circuits on embedded systems.
  • Understand, interpret and implement regulatory specifications.
  • Project management skills including use of software tools (MS Project).
  • Proven knowledge in DFMA methodologies and tools.
  •  Ability to interface with software developers and consultants.
  • Bespoke electronic designs and prototyping.
  • Ability to communicate technical knowledge in a clear and understandable manner.
  • Strong documentation and writing skills.
  • Experience creating, writing and executing test plans, exception cases tests.
  • Familiarity with DLMS/COSEM architecture and protocols would be an advantage.

 

 

 

 

 

 

 

 

Our Location

Plot 21, Jalan Hi-Tech 4, Kulim Hi-Tech Park, Phase 1, 09000 Kulim, Kedah, MALAYSIA

Call Now

P: 6-04-409-6228

GMT +8
Monday to Friday
8.15 AM - 5.25PM

For Business or Product enquiries, please contact us at:

Our Location

Plot 21, Jalan Hi-Tech 4, Kulim Hi-Tech Park, Phase 1, 09000 Kulim, Kedah, MALAYSIA

Call Now

604-4096146

GMT +8
Monday to Friday
8.15 AM - 5.25PM